The Compli-mate series connector was designed for the end user. The multi-spring member compliant section provides a gas tight connection to a plated thru hole, with consistent insertion and withdrawal forces.

Pre-assembled connectors are inserted into the mother board and terminated using a simple flat plate. A.W. Industries is a licensed user of the connector design technology that permits the use of flat rock tooling for the installation of compliant pin card edge connectors.

Unique contact and housing design features assure "crush-proof" mating, even with warped or marginally chamfered daughter boards.

• Designed to conform to Bellcore TR-NWT-000078
• "Flat rock" tooling inslallation
• Compli-mate compliant section provides a gas tight reliable connection to plated through hole
• Contact spacings of .100, .125, .15() and .156
• Full range of connector sizes and contact tail lengths
• De-population of contacts per Customer specification
• High reliability berylium copper shorting contacts as required
• On contact or between contact polarizing keys molded-in or installed
• Contact replacement tool available
• Extended card scoops available
• Modular design of open end versions permits any connector length assembly
• Non compliant dip solder or right angle versions available
  
  

• Insulator material: Glass filled polyester, type PBT UL 94 V-O rated
• Contact material: Phosphor Bronze CDA 510
• Contact plating: Gold over 50 microinches nickel on mating area, tin-lead on tails
• Current Rating: 3 Amps continuous minimum
• Contact resistance:
  • Contact to Daughtcr Card - 10 milliohms
  • Compliant Section to PTH - 2 milliohms
• Dielectric withstanding voltage:
  (.100 contact spacing) 1000 VAC rms at sea level (.125 contaclt spacing) 1500 VAC rms at sea level (.150 contact spacing) 1 800 VAC rms at sea level (.156 contact spacing) 1800 VAC rms at sea level
• Insulator resistance 5000 megohms
• Operating temperature: -55° to 125°C
• Daughter Board insertion force 16 oz. max. per contact pair with .071 thick gauge
• Daughter, Board withdrawal force. 1oz. min. per contact pair with, .054 thick gauge
• Compliant section insertion force: 40 lbs Max
• Compliant section withdrawal force: 10 lbs Min
• Hole Size Requirements (for 1000, 2000, 2149, 2200, 2300, 2400, series):
  Drilled Hole Dia: .0453 ± .001 Copper platlng .001 to .003 Tin-Lead plating: .0001 to .0008 Finished Hole Dia: .040 ± .003
• Hole Size Requirements (for 2900 Series):
  Drilled Hole Dia: .0533 ± .001 Copper plating: .001 to .003 Tin-Lead plating: .0001 to .0008 Finished Hole Dia: .+47 +.003/-.002